SCA Adapters for LVD and Single Ended Scsi Drives

Click picture for details	Part Number	SCA Adapter Description
Internal SCSI Adapters - Ultra 80 pin SCA adapters - ID select jumpers and instructions included.
	SCSA-3720U LVD / SE Multimode No termination. 1" Form Factor. U160 - U2W - U320	If your drive is LVD, you need this SCA Adapter. Ultra SCSI 80F(SCA) to High density 68F Ultra 320 Wired for Low Voltage Differential and Single-Ended for maximum compatibility. Rated Ultra 320. Fully backwards compatible with all LVD applications. Includes jumpers for ID Select. 1" Height. SCA adapter.

To see all products and Place Orders, - Go To Our New Site. Click here.
	SCSA-3740T Active termination All purpose SE adapter. SE	This is our best and most flexible Single Ended SCA Adapter. Ultra SCSI 80F(SCA) to High density 68F or Internal ribbon 50M Designed to be an all purpose SCA adapter. Useful in all applications except LVD and Differential. This adapter gives you the maximum flexibility possible in a Single Ended SCA adapter. 1.5" Height. WARNING : SCSA-3740T will not work with LVD drives, even if they are jumpered to run in SE mode. Use SCSA-3720U instead. SCSA-3740T will work for SE only drives. SCA adapter.

	SCSA-3760-6" Used to convert from an SCA back plane to a non-SCA drive.	This is a reverse SCA Adapter Ultra SCSI 80M(SCA) to High density 68M Very rare. Used to convert an SCA enclosure to a HD-68 drive. This is a reverse SCA adapter.

	SCSA-3700 SE	Ultra SCSI 80F(SCA) to Internal ribbon 50M Low cost alternative for attaching SCA hard drives to a 50 pin chain. If you are unsure about your termination requirements then I would recommend the SCSA-3740T. 1" Height. Please do not use with LVD/SE drives. LVD/SE drives need the SCSA-3720U + SCSA-3920T due to "high byte termination" and LVD SCA requirements. SCA adapter.

To see all products and Place Orders, - Go To Our New Site. Click here.
	SCSA-3705 High Byte only termination Termination cannot be disabled. SE	Ultra SCSI 80F(SCA) to Internal ribbon 50M Useful only in unusual applications. Some hard drives (such as the ST31200WC) require hi-9 termination to run on a narrow chain. 1.5" Height. Hi-byte term is active. SCA adapter.

	SCSA-3745 Differential wiring HVD	Ultra SCSI 80F(SCA) to High density 68F or Internal ribbon 50M Very uncommon, for use in High Voltage Differential systems. You must have a Differential controller and a Differential hard drive to use. 1.5" Height. SCA adapter.

Click picture for details	Part Number	Scsi Cables
· Premium SCSI Cables - Mini Centronics 80 pin male to Mini Centronics 80 pin female internal LVD 160 compliant. · Cables conform to LVD 160 and SE specifications. · Fully Backwards Compatible
	SCSS-S000-0003 U160 - U2W - SE	3 inch SCA Extension Cable SCA-80 Male to SCA-80 Female Temp-Flex brand cable - LVD/SE Ultra 160

To see all products and Place Orders, - Go To Our New Site. Click here.